Twin platform bed frame – Building a platform bed consists of little more than a box configuration with braces around the center and the establishment of a solid piece on top. Queen size mattresses are about 60 inches wide and 80 inches long. The platform should support those dimensions, with about 2 additional along the sides and at the foot of the bed inches to account for the differences manufacturer. The basic technique in mind, you can customize the plan and build a platform bed to suit your taste.
Twin platform bed frame, lay a board 60 inches long flat. Measure 1 inch from the end and mark with a pencil. Repeat the mark at the opposite end of the board. Repeat at both ends of the other plate 60 centimeters long. Draw a line through the ends of the tables in the marks using a ruler or a carpenter’s line.
12 Photos Gallery of: How To Build Twin Platform Bed Frame
Twin platform bed frame, select a drill bit that is the same diameter or slightly smaller than the solid rod screws. Connect the drill bit. Drill three pilot holes equally spaced apart, through both boards 60 inches long on each line. Stand a board 60 inches long upright on one long edge. Stand a board 78 inches long upright on one long edge.